1. Low oil level

2. Plug -in oil
The fuel or coolant in the generator will also cause the engine oil pressure to be too low. Therefore, excessive fuel in the fuel tank will cause the oil level in the crankshaft to be too high. The high oil level in the crankshaft box usually indicates that there are too many fuel or coolant leaks in other parts of the engine. Common pollutants include diesel, coolant or water. Then, the source of the leak must be determined and appropriate maintenance. After finding and repairing the source of pollution, the oil should be discharged and re -injected the oil that is recognized. It is also recommended to replace the oil filter. Sometimes the low oil pressure is caused by small things such as oil filter.

3. The engine oil of the engine oil is opened

4. The oil pipe or oil channel does not work

5. Limitation in the oil absorption tube-low oil pressure
There is an entry filter in the oil absorption pipe, which may be blocked or damaged. This restriction will cause the pressure loss of air erosion and engine oil. The solution is to check the inlet filter on the oil absorption pipe and remove any materials that may limit the oil flow. The pressure of the engine oil is low because the oil absorption pipe is not placed correctly and inhaled air and oil. Check whether there are cracks, alignment or damaged O -shaped sealing circles of the oil -absorbing pipe joint. The best way to contact the oil pipe is to remove the oil bottom.

6. Oil pump problem

7. Improper gap in the bearing